Minolta Di200 Advanced Information Download Page 50

Page: 50 / 250

Getting to Know Your Copier

2-34

Di200

Position the copy paper between
the paper size limiters. The side that
is to be printed must be up.

Did you load special paper
(OHP films, labels, etc.)?

Before starting the copy job,
be sure to set the correct paper
type.
For more information, see page 4-4.

Ensure that the maximum paper
filling height is not exceeded (see
mark on inside of the paper drawer).

Adjust the paper guides to fit the
size of the loaded paper exactly.

Did you load a custom paper
size?

Before starting the copy job,
be sure to set the paper size.
For more information, see page
4-6.

Close the paper drawer carefully.

Summary of Contents for Di200



























































































































































































































































Search results

Summary of Contents for Di200

Reviews:

Brands by name

Popular brands

Minolta Di200, Advanced Information

Search results

Summary of Contents for Di200

Reviews:

Brands by name

Popular brands