Minolta Di1611 User Manual Download Page 87

Page: 87 / 254

4.3 Copying Onto Various Types of Media

4-14

Di1611/Di2011

efu

l O

ratio

apte

r 4

To copy onto postcards

As an example, the following procedure describes how to make copies onto
148 mm

100 mm postcards loaded into the Manual Bypass.

Position the document(s) to be copied.

❍

Refer to

“Loading the Document” on page 3-9

Adjust the paper guides for the
Manual Bypass, and load the
postcards.

❍

Load postcards with the shorter
side as the leading edge, as
shown in the illustration.

✎

Note

Load postcards so that the surface
to be printed on faces downward.

With the Manual Bypass, only one postcards can be loaded at a time.

Press the [No] key.

The “PAPER SOURCE SETUP”
menu appears.

Summary of Contents for Di1611































































































































































































































































Search results

Summary of Contents for Di1611

Reviews:

Minolta Di1611, User Manual, Page: 87 / 254

Search results

Summary of Contents for Di1611

Reviews: