Minolta Di1611 User Manual Download Page 119

Page: 119 / 254

5.7 Specifying a Zoom Setting

5-30

Di1611/Di2011

for

pie

Cha

ter 5

5.7

Specifying a Zoom Setting

By specifying a zoom ratio, the copy can be enlarged or reduced.

Zoom Settings

“Zoom” setting

Description

Full size

Copies are made at the same size as the document (

1.00).

“AUTO” zoom ratio

The most appropriate zoom ratio is automatically selected based on the
size of the document loaded and the specified paper size.

Preset zoom ratios

The following common zoom ratios for copying from various standard
document sizes to standard paper sizes are available.

0.50

0.70 (A3

A4 and B4

B5)

0.81 (B4

A4 and B5

A5)

1.15 (B4

A3 and B5

A4)

1.41 (A4

A3 and B5

B4)

2.00

Zoom ratios selected using
the

and

Zoom keys

Using the

and

keys, the zoom ratio can be adjusted (increased or

reduced) in 0.01 increments.
A zoom ratio between

0.50 and

2.00 can be set.

“X/Y Zoom” function

Copies can be made using different scaling proportions for the vertical
and horizontal directions.
Using the

and

keys, the zoom ratio can be adjusted (increased or

reduced) in 0.01 increments.
The vertical and horizontal zoom ratios can be set between

0.50 and

1.00.

Summary of Contents for Di1611































































































































































































































































Search results

Summary of Contents for Di1611

Reviews:

Related manuals for Di1611

Brands by name

Popular brands

Minolta Di1611, User Manual

Search results

Summary of Contents for Di1611

Reviews:

Related manuals for Di1611

Brands by name

Popular brands