manualshive.com logo in svg

Minolta Di1611, User Manual, Page: 12 / 254

Share
Download
Minolta Di1611 User Manual Download Page 12

1.2 Explanation of Manual Conventions

1

Di1611/Di2011

1-3

Int

ro

duc

tio

n

Chap

ter

 1

1.2

Explanation of Manual Conventions

The marks and text formats used in this manual are described below.

WARNING

Failure to observe instructions highlighted in this manner may result in fatal 
or critical injuries.

➜

Observe all warnings in order to ensure safe use of the copier.

CAUTION

Failure to observe instructions highlighted in this manner may result in 
serious injuries or property damage.

➜

Observe all cautions in order to ensure safe use of the copier.

✎

Note*

(*May also appear as “Important” or “Tip”)
Text highlighted in this manner contains useful information and tips to ensure 
safe use of the machine.

1

The number 1 as formatted here indicates the 
first step of a sequence of actions. 

2

Subsequent numbers as formatted here 
indicate subsequent steps of a sequence of 
actions.

?

Text formatted in this style provides 
additional assistance. 

➜

Text formatted in this style describes the 
action that will ensure the desired results are achieved. 

[Copy] key
The names of keys on the control panel are written as shown above.

An illustration inserted here shows
what operations must be performed.

Summary of Contents for Di1611































































































































































































































































Reviews:

No comments