FrameMaker Ver.5.5E(PC) Di151 DIS/REASSEMBLY, ADJUSTMENT
00.03.21
D-39
4.
MISCELLANEOUS
4-1.
TORSION BAR POSITION ADJUSTMENT
NOTE
When an Automatic Document Feeder or Fax Unit is mounted on the copier, the position of
the torsion bar must be adjusted as detailed below.
1. Remove the Front Upper Cover and control panel.
2. Release and swing up the upper half of the copier.
3. Remove the torsion bar attachment plate.
4. Change the position of the torsion bar in the attachment plate as necessary.
5. Secure the torsion bar attachment plate into position.
Hole
Copier Configuration
A
Factory setting or when the Original Cover is mounted
When the Fax Unit is mounted
B
When the Automatic Document Feeder is mounted
C
When both the Automatic Document Feeder and Fax Unit are mounted
4007D054AA
Torsion Bar Attachment Plate
Torsion Bar
4007D055AA