Troubleshooting
11
11-5
Clearing a media jam at Tray 1
1
Remove the tray cover and any me-
dia in Tray 1.
2
Carefully pull the misfed media out
of Tray 1.
3
Reload the media in Tray 1, and replace the tray cover.
❍
Do not reload curled or wrinkled media.
4
Reinstall Tray 1 in the printer.
5
Close the face-down tray, and then open the top cover.
6
Remove any pieces of media that may have torn off or are remaining
in the printer.
7
Close the top cover, and then open the face-down tray.
8
Open the top cover and close it again in order to reset the printer.
❍
Printing automatically restarts from the page that was misfed.
