8
Working with the printer
8-8
1
Remove the tray 2 from the lower
feed unit by pulling it out as far as it
will go, gently raising up the front,
and sliding it the rest of the way out.
2
Remove the cover from the tray.
3
Press down on the paper lifting
plate until it locks into place.
4
Place a stack of paper into the tray.
?
How many sheets of paper may
I place on the tray?
➜
Tray 2 has a capacity of 500
sheets of plain paper. The stack
of paper should not rise above
the media limit mark.
?
How is letterhead fed in?
➜
Load letterhead with the side to be printed facing up and the pre-
printed letterhead at the top (facing the printer).
5
Replace the tray cover and insert
the tray into the lower feeder unit.
