minnkotamotors.com
19
minnkotamotors.com
SERVICE & MAINTENANCE
c. Remove the spike from
the anchor. (You will not
need to retain the o-ring
from the spike you are
replacing. The new spike
will include a replacement
o-ring.)
d. Place the new spike into
position along with the
replacement o-ring. When
the spike is fully seated
into the anchor, the o-ring
should be slid up to the
face of where the spike is
held. be sure to align the
retainer groove on the
spike with the retainer
pin hole.
f. slide the spike isolator up
the spike and into the
2nd stage. Carefully
replace the spike isolator
retainer pin.
g. Carefully replace the spike
retainer pin, making sure
the ends of the pin are
recessed on both sides.