minnkotamotors.com
31
minnkotamotors.com
Problem: The manual retract procedure won’t work, and I am still stuck
in the down position.
solution:
If the manual retract procedure will not retract the Talon, then
you will need to remove the Talon from the transom mounting
bracket, by loosening the (4) ½" hex head bolts on the sides
of the transom mounting bracket. be careful not to lose
the hardware for mounting the Talon to the transom
mounting bracket.
Problem: My Talon is making a grinding noise when retracting
and deploying.
solution:
You may have sand or silt build up inside. Use a garden hose in
the top washout port to flush out any debris that may be causing
this. If you’re fishing in saltwater, it is a good idea to rinse out the
unit on a regular basis to prevent this kind of build up.
Problem: I cannot see the depth indicator LED’s.
solution:
Confirm that your power connections are good, and that you
have sufficient battery power.
Problem: My depth finder says I’m in 4 feet of water, but my Talon
shows more or less than 4 LED’s. What’s wrong?
solution:
Remember that Talon is an anchor, not a depth finder. The
indicator leD’s on Talon are for reference only, and should not
be used to determine actual depth. They merely represent
approximate depth of deployment of the Talon.