minnkotamotors.com
25
a. each boat sits differently in the water, and has varying amounts of
draft (hull under the water line). While Minn Kota recommends that
the Talon mounting bracket be mounted as high up on the transom
as possible, Minn Kota also recommends that the bottom of the
Talon be a minimum of 4" up from the bottom line of the hull of
your boat. Having this adjustability will minimize any spray that may
occur while under way, and offer the greatest amount of stability to
the Talon.
Q. When do I want to use the reverse angle on the bracket when
mounting the Talon?
a. some boat models have transoms that angle towards the inside
of the boat. In these cases, the Talon quick release bracket can
be inverted to account for this reversed angle without the hassle
of shims.
Q. In the event that my anchor does not deploy, is there a way I can
do it manually?
a. In the case where your Talon does not retract or deploy, we
recommend referring to the trouble shooting section of your
owners manual.
Q. Does the Talon have a fuse? What size is it? Where can
I purchase the fuse?
a. Yes, the Talon has an in-line 30a blade style fuse. These can be
purchased at any automotive parts store.
Q. How is the maximum deployment of the Talon measured?
a. from the bottom of the Talon to the tip of the spike when
fully deployed.
Q. What is the overall length of the Talon when retracted?
a. The 6' Talon is 45" and the 8' Talon is 57".
Q. If I adjust the Talon extrusion lower to the water, do I gain
more depth?
minnkotamotors.com