minnkotamotors.com
14
Removal and Storage
If needed, your Talon can be easily removed from the Transom bracket.
To remove:
1.
Prior to removal, first
disconnect the power cables
from the starting battery.
ensure the cable is
disconnected and will not
interfere with removal of
the anchor assembly. If the
Deployment notification alarm
is being used, the user installed
alarm wire will have to be cut
and re-spliced each time.
Note: You may need to loosen the Outboard Cable and Wire Harness
to pass the power cable and Fuse Assembly back through the boot.
2.
Remove the wire ties holding the power cable.
3.
ensure the power cable is free and clear prior to removing the anchor.
4.
Remove the lower stop nut from the bottom of the Talon starboard track. be
sure to store this in a safe location or place it back onto the Talon once it is
remove from the mounting bracket.
5.
loosen the 4 vertical adjustment nuts while supporting the Talon so it does
not fall. Then slide the Talon up until it clears the tracks.
NOTE: A Quick Disconnect Plug accessory is available from Minn Kota
to simplify the removal of the electrical connection when mounting and
dismounting your Talon. For additional Talon accessories, see pages 21 thru 23.