![background image](http://html1.mh-extra.com/html/minn-kota/1866080/1866080_owners-manual_1802715005.webp)
minnkotamotors.com | 5
©2020 Johnson Outdoors Marine Electronics, Inc.
USING THE FOOT PEDAL
MODES
The Ulterra Foot Pedal has two modes of operation, Normal Mode and Ulterra Mode. To alternate between the Modes, press the MODE
button located on the right side of the Foot Pedal, just above the Speed Control knob. The amber light on the Indicator Panel
illuminates on and off when toggling between modes. The Indicator Panel is located on the top, left side of the Foot Pedal. Switching
between the modes of operation affects the functionality of the three buttons at the bottom of the Foot Pedal. These buttons include:
1. Steer Left/Trim Up button
2. Stow/Deploy/Prop ON/OFF button
3. Steer Right/Trim Down button
Normal Mode
When in Normal Mode, the buttons at the bottom of the Foot Pedal function to Steer Left, Steer Right, and turn the Prop ON/OFF. The
amber light
MODE
on the Indicator Panel will not be illuminated when in Normal Mode.
Ulterra Mode
When in Ulterra Mode, the buttons at the bottom of the Foot Pedal function to Trim Up, Trim Down, and Stow/Deploy. The amber light
MODE
on the Indicator Panel will be illuminated during Ulterra Mode.
FOOT PEDAL OPERATION
Motor Speed
The Speed Control knob is located on the right side of the Foot Pedal between the MODE and Spot-Lock buttons. Turn the Speed Knob
forward to increase speed and backwards to decrease speed. The Speed Control knob can be set in a range from 0 to 10, and can be
adjusted in both Normal and Ulterra Modes. Speed can also be adjusted using the remote.
AutoPilot ON/OFF
AutoPilot ON/OFF
Constant
Constant
Momentary ON
Momentary ON
Spot-Lock
Spot-Lock
Speed Control
Speed Control
Steer Left/Trim Up
Steer Left/Trim Up
Steer Right/Trim Down
Steer Right/Trim Down
Stow/Deploy
Stow/Deploy
Prop ON/OFF
Prop ON/OFF
MODE
MODE
Heel/Toe Steering
Heel/Toe Steering
Power
Power
Connection
Connection
from Motor
from Motor
Foot Pedal
Foot Pedal
Connection
Connection
Indicator Panel
Indicator Panel
Indicator Panel
Indicator Panel
MODE
MODE
Constant ON
Constant ON
AutoPilot/
AutoPilot/
Spot-Lock
Spot-Lock
WARNING
Practice proper ergonomics when operating the foot pedal to
prevent injury.
CONTROLLING SPEED & STEERING WITH THE FOOT PEDAL
The Foot Pedal is used to operate the Ulterra or Riptide Ulterra trolling motor. The controls on the Foot Pedal are easy to use. The trolling
motor can also be controlled by an i-Pilot or i-Pilot Link remote, as well as any compatible Minn Kota remote. Please refer to the
i-Pilot
,
i-Pilot Link
or compatible remote manual on how the remote controls the motor.