4 | minnkotamotors.com
©2020 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
b. Locate the Foot Pedal Cord that exits the mount of
the Ulterra or Riptide Ulterra, next to the Power Cord.
c. Unscrew the caps at the end of the Foot Pedal
cords exiting the motor and the Foot Pedal.
d. Plug the cords together and make sure the
connection is secure. Be sure to tighten the
connector retaining nut.
AUTOPILOT
MODE
SPOT-LOCK
CONS
TANT
NOTICE:
The connectors are keyed to prevent
reversed installation.
Foot Pedal
Foot Pedal
Cord from
Cord from
Foot Pedal
Foot Pedal
Cap
Cap
Foot Pedal
Foot Pedal
Foot Pedal
Foot Pedal
Cord from
Cord from
Foot Pedal
Foot Pedal
Foot Pedal
Foot Pedal
Cord from
Cord from
Trolling
Trolling
Motor
Motor
Mount
Mount
Power
Power
Cord
Cord
INSTALLATION
Installing the Ulterra and Riptide Ulterra Foot Pedal
NOTICE:
Adding the Foot Pedal pads is optional.
The pads are recommended when using the Foot
Pedal on non-carpeted surfaces.
Foot Pedal
Foot Pedal
Bottom
Bottom
Foot Pedal
Foot Pedal
Pad Placement
Pad Placement
ITEM(S) NEEDED
#2 x 5
#A x 1
a. Take the Foot Pedal (Item #A) and turn it over.
Put a Foot Pedal Pad (Item #2) in each of the
pad locations.
Foot Pedal
Foot Pedal
Cord from
Cord from
Trolling
Trolling
Motor
Motor
1
2
2b
2c
2d