e. Once an orientation for the Handle Assembly is
selected, place the Padlock Pin (Item #8) into the
Outer Plate on that side, oriented so that the larger
diameter of the Pin is in the Outer Plate. Rotate the
Pin so that the hole in the Pin lines up with the hole
in the Outer Plate. Secure the Pin with the 1/4-20 X
7/8 Screw (Item #12) using an #3 Screwdriver.
ITEM(S) NEEDED
Outer Plate
Outer Plate
Padlock Pin
Padlock Pin
Screw
Screw
Outer Plate
Outer Plate
Padlock Pin
Padlock Pin
#12 x 1
#8 x 1
3
f.
Take the box that the Quick Release Bracket came
in and carefully pull the glued edges apart and open
the box so that it lays flat. On the inside of the box
a template is printed to help locate, mark, and drill
the holes for the Inner Plate. Cut the template out
and place it on the bow. Align it with the markings
that were made while checking handle and motor
clearances. Make sure that the orientation of the
Outer Plate in the template matches the orientation
of the Outer Plate as it is attached to the Motor.
g. The template indicates four drill holes on the Inner
Plate. Use the template to mark the locations of the
drill holes. When marked, lift the template away.
h. Use a 17/64" drill bit to drill the holes.
Inboard
Inboard
Drill Holes
Drill Holes
Drill Holes
Drill Holes
Template
Template
Outboard
Outboard
4g
4f
Template
Template
Markings
Markings
Inboard
Inboard
Outboard
Outboard
Markings
Markings
4
8 | minnkotamotors.com
©2020 Johnson Outdoors Marine Electronics, Inc.