MINN KOTA 1854019, Installation Instructions Manual

Page: 2 / 20

INSTALLATION
Installing the Outer Plate to an Edge or RT Edge
Inboard Inboard Inboard Inboard Inboard Inboard Inboard Inboard
Ultrex Ultrex Fortrex & Fortrex &
RT Fortrex
RT Fortrex
Edge & Edge &
RT Edge
RT Edge
Maxxum & Maxxum &
RT Maxxum
RT Maxxum
The MKA-23 is designed to be compatible with the Ultrex™, Fortrex ® , Edge and Maxxum ® Minn Kota ® motors. The RTA-19 is designed
to be compatible with the RT Fortrex ® , RT Edge and RT Maxxum ® Minn Kota ® motors. The base extrusion or motor rest of the trolling
motors may vary. Please note the appearance of the applicable trolling motors and mounting brackets. For a complete list of motors
compatible with the MKA-23/RTA-19, please refer to the website at minnkotamotors.com.
a. Determine the mounting hole pattern you wish to
use. The bolt pattern selected will depend on the
deck space available on your boat.
Hold Down Strap Hold Down Strap
Pattern 2 Pattern 2
Pattern 1 Pattern 1
15 3/4“ 15 3/4“
Bow Bow
1
WARNING
For motors with Lift Assist (Fortrex, RT Fortrex, Ultrex), the Lift Cylinder should be disengaged until installation is complete to prevent injury.
For instructions on how to disengage the Lift Cylinder, please see the Owner's Manual for your trolling motor at www.minnkotamotors.com .
2 | minnkotamotors.com ©2020 Johnson Outdoors Marine Electronics, Inc.