3
#22 x 6
#18 x 6
#24 x 6
ITEM(S) NEEDED
e. Align the Base Extrusion with the mounting holes of
the Outer Plate.
f.
Use six 1/4” x 1 1/8” Socket Head Screws
(Item #22), six Flat Washers (Item #18) and six
Nylock Nuts (Item #24) to fasten the motor mount
to the Outer Plate. The Screws should pass through
the Base Extrusion, then the Outer Plate, then the
Flat Washers and be secured by a Nylock Nut.
g. If it was removed, reinstall the right Side Plate with
the Screws and a #2 Screwdriver.
Installing the Inner Plate to the Bow
3f
Base
Base
Extrusion
Extrusion
Screw
Screw
Outer
Outer
Plate
Plate
Buckle
Buckle
Flat Washer
Flat Washer
Nylock
Nylock
Nut
Nut
Sideplate
Sideplate
ITEM(S) NEEDED
#6 x 1
a. Determine if the motor will be mounted on the
Port or Starboard side of the bow and if the
Handle Assembly (Item #6) will release inboard or
outboard. Be sure that the Handle Assembly will
not encounter any obstructions on the bow of the
boat and can be completely pulled out to release the
plates when mounted. The bracket is designed so
that the handle can be positioned on either side to
accommodate clearances and personal preference.
The side of the bracket that the Handle Assembly is
used on will determine which side the Padlock Pin
(Item #8) will be installed on.
NOTICE:
Make sure that the motor will not encounter
any obstructions when positioning the motor on and off
the Quick Release Bracket. The exact placement of the
motor and bracket, when mounting, may vary depending
on the boat, boat deck, and which base extrusion the
bracket is being mounted to.
Bow of
Bow of
Boat
Boat
Bow of
Bow of
Boat
Boat
Handle
Handle
Assembly
Assembly
Positions
Positions
Handle
Handle
Assembly
Assembly
Positions
Positions
Outboard
Outboard
Outer Plate
Outer Plate
Outboard
Outboard
Inboard
Inboard
Inboard
Inboard
Port
Port
Starboard
Starboard
1
Outboard
Outboard
Inboard
Inboard
Stabilizer
Stabilizer
Strap
Strap
Padlock
Padlock
Pin
Pin
NOTICE:
To prevent seizing of the stainless steel
hardware, do not use high speed installation tools.
Wetting the screws or applying an anti-seize may help
prevent seizing. If possible, secure all sets of mounting
bolts, nuts and washers.
#8 x 1
Inner
Inner
Plate
Plate
6 | minnkotamotors.com
©2020 Johnson Outdoors Marine Electronics, Inc.