![background image](http://html1.mh-extra.com/html/minn-kota/1810430/1810430_installation-instructions-manual_1802711011.webp)
minnkotamotors.com | 11
©2017 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE TALON
n. Next the Talon Assembly should be installed on the
Mounting Bracket. Take the Talon Assembly (Item
#B) and notice that there is an Assembly Track
located on both sides of the Talon.
o. When the Talon is properly oriented as it would
be installed, there is a single Vertical Stop Bolt
located on the Starboard side of the Talon along the
Assembly Track. The Vertical Stop Bolt is used as a
reference point or guideline to stop the Talon and
position the Mounting Straps in the Assembly Track.
Ensure that the Vertical Stop Bolt is secured in the
approximate final position.
p. Carefully lift the Talon Assembly into the Mounting
Bracket and align the Mounting Straps with the
Assembly Track. Slide the Guard Washers to the
inside wall of the Mounting Bracket, so that they sit
between it and the Talon Assembly. Slide the Talon
Assembly down the Assembly Tracks until it comes in
contact with the Vertical Stop Bolt.
7
#B x 1
Assembly
Track
Talon
Assembly
Assembly
Track
Assembly
Track
Assembly
Track
Talon
Assembly
Talon
Assembly
Talon
Assembly
Vertical
Stop Bolt
Vertical
Stop Bolt
Mounting
Straps
Mounting
Bracket
Mounting
Bracket
Mounting
Strap
Port
Starboard
7n
7o
7p
7p
NOTICE:
We recommend a second person to help
with this step of the installation.
ITEM(S) NEEDED