![background image](http://html1.mh-extra.com/html/minn-kota/1810430/1810430_installation-instructions-manual_1802711013.webp)
minnkotamotors.com | 13
©2017 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE WATER DEFLECTION SHIELD
3
2
NOTICE:
The Water Deflection Shield will always
be installed on the bottom side of the Mounting
Bracket regardless of the orientation that the
Mounting Bracket was installed. There should be no
gap between the shield and the Talon.
d. Take two each of the 1/2" Washers (Item #22) and
two of the 1" Phillips Pan Head Screws (Item #24) to
attach the shield to the Mounting Bracket. Place one
washer on each of the screws. The screw should pass
through a washer, then the Water Deflection Shield
and into the Mounting Bracket. Secure the screws
using a #2 Screwdriver.
c. Align the closest set of holes in the shield with the
holes in the bottom of the Mounting Bracket. The
set of holes used on the shield will vary for each
individual installation.
2c
2c
Water
Deflection
Shield
Water
Deflection
Shield
Mounting
Bracket
Mounting
Bracket
Mounting
Bracket
Hole
Mounting
Bracket
Hole
Talon
Assembly
Talon
Assembly
#24 x 1
#22 x 1
NOTICE:
To prevent seizing of the stainless steel
hardware, do not use high speed installation tools.
Wetting the screws or applying an anti-seize may
help prevent seizing.
NOTICE:
If you adjust the angle of your Talon after
this step is complete, you will need to re-adjust the
placement of the Water Deflection Shield to ensure
proper functionality.
3d
3d
Water
Deflection
Shield
Washer
Phillips Pan
Head Screw
Phillips Pan
Head Screw
Washer
Water
Deflection
Shield
Mounting
Bracket
Mounting
Bracket
Talon
Assembly
Talon
Assembly
ITEM(S) NEEDED