MiniacRC
[ 28 ]
HATCH
Parts) hatch plate, hatch skins A, B and C, formers H, I, J and K, windshield, canopy stringer,
hatch lock, canopy, masking tape, posterboard
Glue formers H, J and K to the hatch plate, front to back, making sure that they sit up at 90-
degrees with respect to the plate.
Glue the flaps at the ends of the plate using B-folds and as the glue hardens, perform a dry fit
on the fuselage. Adjust any angles as necessary. The fit should be moderately snug.
You will see a small gap between each former and the left and right edges of the plate. Using a
blunt object, lightly indent the top of each edge uniformly till this gap disappears.
This will make molding easier at later steps.