MiniacRC
[ 22 ]
For each of the rear flaps, working
from
back to front
, we’ll follow a similar procedure:
•
Perform a dry fit to ensure alignment.
•
Sand/trim the edges of the flap
and/or any formers/stringers
if the fit is unsatisfactory.
•
Place masking tape to temporarily hold the flap down.
Once you are happy with the fit of the Mustang’s fuselage skin,
gently
peel off all the pieces of
masking tape, leaving each of them wherever convenient for reuse in the
same
spot.
Repeat the above steps, this time
with glue
. To avoid placing glue in the wrong spots, use a
pencil to mark the desired glue location(s) as you work through each step.