background image

www.modellmarkt24.ch

Model No : FF-D004

MiG-29

Scale EDF Radio Control model airplane

Wingspan : 1145mm

UNDER SAFETY PRECAUTIONS

This radio control is not a toy!

- Always keep this instruction manual ready on hand for quick reference.
- Assemble this kit only places out of children reach.
- First-time builders of EDF model should seek the advice of experienced modellers before 
  beginning assembly and if they do not fully understand any parts of the construction.
- Taking out liability insurance is recommended.
- You are responsible for this model’s assembly and safe operation.

1 pc required

1.    Signal cable
       (Throttle)

3.    Silicone Battery cable  (No. 12AWG or 14AWG)

800mm

2 pc required

You need to purchase the following accessories separately to complete the assembly.

2 pcs required

800mm

2.    Signal cable
       (Elevator)

2 pc required

5.    60A Electric Speed Control (ESC) w/BEC
       

60A
w/ BEC

2 pc required

6.    B36 Brushless Motor, 1600-1800kv, 
       Shaft dia 5mm

2 pcs required

7.    Micro servo, torque >1.8kg

2 pc required

4.    Li-Po Battery, 5-cells (18.5v), 3600mAh, 20C

Copyright 2007 Fly Fly Hobby 

Designed and Manufactured by : Fly Fly Hobby Mfg.       http://www.flyflyhobby.com

C

800mm

www.modellmarkt24.ch

Summary of Contents for FF-D004










Reviews: