Page 17 of 50
AN-49-003 Rev.: E (September 6, 2019) M175867 (R95153) File: AN49003.doc
This document and its contents are the property of Mini-Circuits
3
Chapter 3
– Using Mini-Circuits Generator GUI Program
3.1
Starting the Generator Software in USB control
3.1.1
Go to the Start menu
and select All Programs>Mini-Circuits Generator (default), or go to the
other destination address you s
elected earlier. The “Mini-Circuits Generator” icon should be waiting
there for you. Click on it, and get started!
Figure 3.1.1:
Startup screen
3.1.2
The startup screen allows you
to select the control method you wish to use for the SSG,
USB or Ethernet control. For USB control click on the USB button, for Ethernet control see
3.1.3
If multiple generators are
connected via USB the initial screen will show a list of S/N for
connected units. Select the unit you wish to start with and click
OK
, or click
Cancel
to exit the program.
The program can handle up to 24 units connected
simultaneously
.
Figure 3.1.3:
Unit selection screen
