Minebea CSD-581-15, Instruction Manual

Page: 97 / 122

77
D F
−
07 Setting data width of zero tracking
Initial value
＝
00000 00000
＝
Zero tracking OFF
Setting range
：
00000 to 00099
Unit
：
0.5D
Data width of 49.5D with the setting of “00099”.
※
Effective only when the value from 00001 to 00099 is set with the F
−
08.
D F
−
08 Setting zero tracking time width
Initial value
＝
00020 00000
＝
Zero tracking OFF
Setting range
：
00000
〜
00099
Unit
：
0.1 s
Time width of 9.9 s with the setting “00099”.
※
Effective only when the value of 00001
〜
00099 is set with the F
−
07.
D F
−
09 Setting digital filter for stabilized filter
Initial value
＝
00001 00000
＝
Stabilized filter OFF
Setting range
：
00000
〜
00002
Average of 2
(m
＋
7)
times
※
Selects average times of digital filter for stabilized filter.
When the figure grows larger, the filter will be stronger, then the effects
from vibration and so on are scarcely shown on the display.
※
Effective only when setting is made with the value from 00001 to 00099 with
F
−
10, and the value from 00001 to 00999 is set with the F
−
97.
D F
−
10 Setting time width for stabilized filter
Initial value
＝
00020 00000
＝
Stabilized filter OFF
Setting rage
：
00000
〜
00999
Unit
：
0.01 s
Time width of 9.99 s with the setting of “00999”.
※
Effective only when the value from 00001 to 00007 with F
−
09 and the value
from 00001 to 00999 with F
−
97 are set.
D F
−
20 Selection of target of BCD output
Initial value
＝
00002 00000
＝
Display
00001
＝
Net weight
00002
＝
Gross weight
00003
＝
External selection
※
When “Display” is selected, BCD output interlocks with the display.
And when “Net weight” is selected, BCD output will interlock with the value
of “Net weight” at the time of executed tare weight cancellation and also
BCD output interlocks with “Gross weight” individually at the time of Tare
weight cancellation clear.
When “Gross weight” is selected, BCD output will interlock with the value
of “Gross weight”, whichever Tare cancellation is executed or not.
When “External selection” is selected, the target of BCD output can be
chosen among “Display”, “Net weight” and “Gross weight” through the
input of SEL1 or SEL2 at external control input.