Minebea CSD-581-15, Instruction Manual

Page: 57 / 122

37
5
−
2
−
4. Fine adjustment on zero

●
During tare weight cancellation (A/Z) and zero set is executed, and
also during zero tracking is effective, zero fine adjustment mode can’t
be entered.(Displays ERR
−
5.) After executing tare weight
cancellation clear (A/Z OFF) and cancellation for compensated data
for zero set (Executes F
−
98.) and setting OFF the zero tracking
(F
−
07 & F
−
08 to show “0000”), enter in zero adjustment mode.
●
When interrupting the calibration is required, press the “FUNC.” key
during the calibration procedures. The calibration data keeps the
same condition as it is entered before, then Measurement mode can
be entered.
●
When the “A/Z A ” key is pressed with the load display of “FUNC.”,
the display will change as the following sequence at every time the
key is pressed. “FUNC”
→
“CCAL”
→
“ACAL”
→
“LCAL”
→
“ZERO”
→
“SPAN”
→
“TARE”
→
“CHECK”
→
“MONIT”
→
“F
−
END”
→
“FUNC”
→
“CCAL”
→･････
(Hereinafter, it will repeat.)
Procedures
1
Press the “FUNC.” key for about one second.
The load display will show “FUNC”.
2
Press the “A/Z A ” key 4 times.
It will change the display of the load display as
“CCAL”
→
“ACAL”
→
“LCAL”
→
“ZERO”.
At the same time, set the initial load condition.