— APPLIC
Application (see chapter
6.2.1
)
— METRO
Metrology (see chapter
6.2.2
)
— UNIT
Weighing units (see chapter
6.2.3
)
— OP.FUNC
Operation functions (see chapter
6.2.4
)
Printer outputs (see chapter
6.2.5
)
— PRN.COM
Printer port communication (see chapter
6.2.6
)
— PC.OUT
PC output (see chapter
6.2.7
)
— PC.COM
PC port communication (see chapter
6.2.8
)
— CAL.ADJ
Calibration / Adjustment (see chapter
6.2.9
)
— INFO
Information (shows serial number and type
designation)
— SECURE
Block menu items (see chapter
6.2.11
)
— E.N.D.
Leave menu
— WEIGH
Weighing mode
— OFF
disabled
— ON
enabled*
— COUNT
Count mode
— OFF
disabled
— ON
enabled*
— CHECK
Check mode
6.2
Menu Navigation
Overview of Menu Mode options.
6.2.1
Menu Selection [APPLIC]
Enter this menu to select application to be used.
Only activated units will be accessible with the
Mode
F
(Mode) Button.
Default settings are identified by an "*"
APPLIC
5. When [END] is displayed, press
Off
(Yes) button to return to sub-menu selections.
6. Press the
Unit
(No) button to return to the first item in the current menu.
7.
Press the
Menu
M
+
button to exit the menu.
6 Menu Settings
Bench scale Puro®
Minebea Intec
EN-31
All manuals and user guides at all-guides.com
