The scale will then display [SET.HI] (set high limit).
11. Press the
Unit
button to increase or the
Mode
F
button to decrease the digit value.
12. Press the
Off
(Yes) button to accept and highlight the next digit.
The 2nd digit is blinking [0_0000].
13. Press the
Unit
button to increase or the
Mode
F
button to decrease the digit value.
14. Repeat until all the digits are correct.
15. Press the
Off
(Yes) button to confirm.
The Display will show the low limit value with all digit blinking [000500] (in this
example, 500 pcs).
16. Press the
Off
(Yes) button accept the low limit value.
17. Same procedure like low limit setting.
The Display will show the high limit value with all digit flashing [00510.0] (in this
example, 510 pcs).
18. Press the
Off
(Yes) button to accept high limit value.
The scale is ready for check counting application with new checklimit. Go on step
21.
5 Operation
Bench scale Puro®
Minebea Intec
EN-23
All manuals and user guides at all-guides.com
