2
Safety instructions
2.1
General safety information
Follow these safety precautions:
-
The equipment may only be used as intended for weighing tasks.
-
Observe the operating limits of the device.
-
Avoid shock stress (falling down, hard shocks, falling loads, any impact from the side).
-
Do not use the equipment in hazardous areas and unstable environments.
-
Do not expose the equipment to aggressive chemical vapors or to unnecessarily
extreme temperatures, moisture, or vibration.
-
Unplug the device before you connect or disconnect any electronic peripheral devices
to or from the interface port.
-
Unplug the power cord from the mains supply before cleaning.
-
Make sure that no liquid enters the equipment.
-
Unplug the power cord from the mains supply befory servicing or making internal
connections. The housing may only be opened by authorized and qualified personnel.
-
Do not use loads that exceed the capacity of the scale.
2.2
Incoming goods inspection
The shipment must be checked for completeness. A visual inspection must be performed
to determine if the shipment has been damaged. If there are grounds for a complaint, this
must be brought to the attention of the delivery company immediately. A Minebea Intec
sales or service point must be informed. Visit our website http://www.puroscales.com or
contact your dealer.
2.3
Before operational startup
NOTICE
Perform visual inspection.
Before operational startup as well as after storage or transport, inspect the product
visually for signs of mechanical damage.
The product may not be put into operation if it has visible damage and/or is
defective.
2 Safety instructions
Bench scale Puro®
Minebea Intec
EN-5
All manuals and user guides at all-guides.com
