5.2.3.2
Check Count Mode
Compare the quantity of items to a targeted quantity range.
Example: The required target quantity range is between 500 pcs (low limit) to 600 pcs
(high limit)
Note:
Activation of this mode must be done prior via menu. See Chapter
6.2.1
.
Release the button. The application is activated.
If there is already a piece weight initialized, [CLR.PW] (clear piece weight) is
displayed.
1.
To select the check count mode or restart with a new reference quantity sample,
press and hold the
Mode
F
button until [CHECK] is displayed with application icons
and
at bottom of the screen.
2.
Press the
Unit
(No) button to use the stored piece weight (PW) and go on at step 11.
3.
Press the
Off
(Yes) button to clear the stored piece weight (PW) and set a new PW.
The scale will display [PUT.20] (for example).
4. Choose the desired reference quantity sample by pressing the
Mode
F
button briefly
(decrement) or
Unit
(No) button (increment) to toggle the choices [10, 20, 50, 100,
200].
5. Press the
Off
(Yes) button to confirm reference sample quantity.
If the pan is empty [PUT.PW] (put piece weight) is shown on the display.
5 Operation
Bench scale Puro®
Minebea Intec
EN-21
All manuals and user guides at all-guides.com
