The scale is ready for check weighing application with new checklimit.
Go on at step 14.
Taring the container on scale.
sample weight < target range
Yellow LED lights up.
sample weight within target range
Green LED lights up.
sample weight > target range
Red LED lights up.
12. Repeat again the setup procedure.
13. Press the
Off
(Yes) button to establish new check limit value or press the
Unit
(No)
button to use stored check limit value.
14. Place container on the scale (in this example, 0.527 kg).
15. Press the
T
button with [NET] appear beside the weight value.
16. Place sample in the container.
17. To view the current check limit reference value (in this example, low limit value is 1 kg
and high limit value is 1,100 kg), press the
Mode
F
button briefly at anytime during
check weighing process.
The scale displays the low limit value with yellow LED light briefly and the high
limit value with red LED light briefly.
Bench scale Puro®
5 Operation
EN-20
Minebea Intec
All manuals and user guides at all-guides.com
