36
9-9 Visual and audio indication for handheld unit
Power on alert: After power-on the scanner will generate an alert signal to indicate a successful self-test.
LED indication: After each successful reading, the LED above the scanner will light up to indicate a good
barcode reading.
Beeper indication: After each successful reading, the scanner will beep to indicate a good barcode
reading, and its beep tone duration is adjustable.
Beep tone duration: This parameter can be adjusted for a good reading upon favorite usage.
Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper.
Example:
Visual and audio indication of handheld unit for RF transmission
Successful Transmission
Audio (Beeper)
Red LED on handheld unit
Yes
None
Off
No
Three beeps
On
SETUP
Option bar code
Option
Alpha. entry
Power on alert
Disable
Enable
00
01*
LED indication
Disable
Enable
00
01*
Beeper indication
Disable
Enable
00
01*
Beep tone duration
01-09 (10ms )
01-09
05*
Volume of beeper
Low
Middle
High
00
01
02*
END
Summary of Contents for CS3290
