vii
Cradle with RS-232 cable and adaptor
1)
Keep the power cord away from stoves and other sources of extreme heat. Heat can melt the
insulation of the power cord and create the danger of fire and electrical shock.
2)
Never pull on the power cord when unplugging it. Doing so can damage the cord and create the
danger of personal injury, fire and electrical shock. Always hold onto the pug when unplugging it
from the wall outlet.
3)
Never touch the plug while your hands are wet. Doing so can create the danger of electrical
shock.
4)
Be sure to unplug the power cord from the wall outlet before moving the Basic Unit. Failure to do
so can result in damage to the power cord caused by pulling it, which creates the danger of fire
and electrical shock.
5)
Be sure to unplug the power cord from the wall outlet before cleaning the Basic Unit and charger.
6)
Be sure to turn the power off and unplug the power cord after use.
7)
Unplug the power cord from the wall outlet and clean the area around the plugs at least once a
year. If dust collects on the AC/DC adaptor, humidity or moisture may cause a fault in the
insulation, which may result in a fire.
Summary of Contents for CS3290
