Mindeo CS3290 User Manual Download

Page: 94 / 96

16 Display firmware version & radio communication setting

Cradle firmware version display
If you wish to display the firmware version of the cradle, please scan
the barcode above.

Handheld unit firmware version display
If you wish to display the firmware version of the handheld unit, please
scan the barcode above.

Cradle radio communication setting display

※

If you wish to display the radio communication setting of the cradle,
please scan the barcode above.

Handheld unit radio communication setting display

※

If you wish to display the radio communication setting of the handheld
unit, please scan the barcode above.

Note: The settings indicated with (

※

) are valid only when the cradle is in

upgrade ready mode

Cradle entering upgrade ready mode
Keep pressing the S button on the cradle, until the blue LED is flashing. Then three LEDs will all be
turned ON, this indicates the cradle being upgrade ready mode.

Summary of Contents for CS3290

































































































Search results

Summary of Contents for CS3290

Reviews:

Related manuals for CS3290

Brands by name

Popular brands

Mindeo CS3290, User Manual

Search results

Summary of Contents for CS3290

Reviews:

Related manuals for CS3290

Brands by name

Popular brands