Mimio MimioBoard ME-77, User Manual

Page: 18 / 28

Getting Started
Projecting Your Desktop
If you are presenting from a MimioStudio Notebook or another application, such as a
PowerPoint presentation, you can open the application before or after Interactive mode is
enabled and calibrated.
To start Interactive mode
1. Project your desktop image onto your MimioBoard surface.
Refer to your projector’s documentation for instructions on how to project your desktop
image.
2. Click the stylus anywhere on the MimioBoard surface.
Interactive mode starts and the calibration screen appears.
To exit Interactive mode
Do one of the following:
l
Press the Interactive button, , twice on the MimioBoard.
l
Start MimioStudio Tools, click Interactive , and then click Exit .
l
Start MimioStudio Settings, select Interactive , and then click Disable .
Calibrating Interactive Mode
Each time Interactive mode is enabled, you are prompted to calibrate using the stylus.
When using MimioBoard with a permanently installed projector, you do not need to
recalibrate Interactive mode after the first session.
To calibrate Interactive mode
1. If the calibration screen does not appear when you start Interactive mode, do one of the
following:
l
Press the Interactive button, , on your MimioBoard.
l
Start MimioStudio Tools, click the
Interactive
button, , and then click
Recalibrate .
l
Start MimioStudio Settings, select
Interactive
, and then click
Calibrate
.
2. Press the stylus down on the MimioBoard surface at the center of each of the nine
calibration targets.
Make sure to hold the stylus perpendicular to the writing surface as you click.
14