Mimio MimioBoard ME-77, User Manual

Page: 12 / 28

Getting Started
10. Make sure the MimioBoard cable goes through the cable channel and that the
MimioBoard is flush against the wall.
11. Locate the two holes on the bottom of the MimioBoard and do the following for each
of the two holes:
a. Align the slot in the L-bracket with the hole on the bottom of the MimioBoard.
b. Make a mark on the wall in the center of the slot in the L-bracket that is touching
the wall.
12. Remove the L-brackets and drill a hole at each mark using a ¼ in (6.35 mm) drill bit.
8