MIMAKI GP-604D, Operation Manual

Page: 64 / 134

- 4.4 -
Register the function on each purpose (Type Registration)
The FUNCTION mode consists of 13 items.
The 13 items can be registered for the following four types.
It enables to change plotting conditions easily as usage.
Registering a type
1. Make sure that the mode is LOCAL mode.
2. Press the [FUNCTION] key.
3. Press the [ENTER] key.
4. Select any of Types 1 through 4 by pressing
the JOG keys [ ] and [ ].
5. Press the [ENTER] key.
Setting Plotting Conditions.
page 4.5
Changing the type
If plotting conditions for types 1 through 4 have already been registered, settings can be selected
according to the plotting simply by selecting the type.
1. Perform steps 1 through 5 above.
Select a type.
2. Press the [END] key.
Performs printing according to the print condition of the
selected type.
< LOCAL >
Width : 610 mm
FUNCTION
SET UP
< ENT >
SET UP
SELECT
: TYPE . 1
SET UP
SELECT
: TYPE . 2
TYPE . 1
FEED COMP.
< ent >
TYPE . 3
FEED COMP.
< ent >
SET UP
SELECT
: TYPE . 2