- 1.6 -
Heater
The table is heater built-in.
Provide appropriate temperature by the heater to prevent the ink from coming though the wrong
side. It also enables to increase the coloring effect.
The heater status indicated with the LED indicator.
When turned off the device power, the heater power is also turned off.
• Don’t touch the heater part for the part (on the table) is heating up while the
heater is on, or it may cause burns.
• The HEAT indicator may go off while the CONSTANT indicator is lighting.
This is not an error but an indication that the temperature of the print heater
have reached the set temperature and heating is interrupted.
• If any failure occurs in the heater, it indicates [! HEATER] on the display.
Press the [END] key to display the detail information on the error.
page 6.7
HEAT indicator
Lights in orange while the heater
is being heated.
CONSTANT indicator
Lights in green when the heater reaches
the set temperature.
Heater power switch
Turns on/off the heater power.
<LOCAL>
!
HEATER
Width :
∗
∗
∗
mm
THERMISTOR
BREAKAGE
Heater Power OFF
*The power is being off
*Thermistor failure
*Heater disconnection
Summary of Contents for GP-604D
