MIMAKI GP-604D, Operation Manual

Page: 113 / 134

- 6.7 -
The heater has failed. Press the [END] key to display
the details of the error. Check the
error.
∗ REMOTE ∗ ! HEATER
TYPE. 1 x.x
<LOCAL> ! HEATER
width : x.x mm
Heater Power OFF
The power of the heater is off. Turn on the power of the heater.
If the same error message appears
again on the LCD, contact your
local distributor to call for
service.
Print THERMISTOR
The thermistor of the print
heater is defective.
Print BREAKAGE
The heater is disconnected.
Contact your local distributor to
call for service.
Warning message Cause Corrective measure
WRONG INK IC
KCMY - - - -
The IC chip of the ink cartridge
cannot be read normally.
The type of the loaded ink
cartridge is different from the
previous one.
The color of the loaded ink
cartridge is different from the
previous one.
No cartridge attached to the ink
station.
Attach the ink cartridge(s)
corresponding with the color
shown on the display. If the same
error message appears again on
the LCD, contact your local
distributor to call for service.
Check the type of the loaded ink
cartridge.
Check the color of the loaded ink
cartridge.
Attach the ink cartridge(s)
corresponding with the color
shown on the display.
KIND OF INK
KCMY - - - -
INK COLOR
KCMY - - - -
NO CARTRIDGE
KCMYWWDD
Use the ink specified by MIMAKI. The loaded ink cartridge is not
MIMAKI genuine.
NON-ORIGINAL INK
KCMY - - - -