© 2009 MIMAKI ENGINEERING CO.,LTD.
1.3.11
P.2
1.3.11 Initial Filling
Current ink
-> Target ink
ES3 8-color ->
SS21 4-color
ES3 8-color ->
SS21 6-color
ES3 8-color ->
SS21 6-
color+White
ES3 8-color ->
ES3 4-color
ES3 8-color ->
ES3 6-color
Initial status
ES3 6-color+
White+Silver
ES3 8-color
ES3 8-color
ES3 8-color
ES3 8-color
Step1
Version
check of F/W
and RLP
Step2
Head wash-
ing
Select “YES” to
“Do you change
an ink set?” from
“#ADJUST”->
“HEAD WASH”.
Select “NO” to
“Do you change
an ink set?” from
“#ADJUST”->
“HEAD WASH”.
Select “NO” to
“Do you change
an ink set?” from
“#ADJUST”->
“HEAD WASH”.
Select “YES” to
“Do you change
an ink set?” from
“#ADJUST”->
“HEAD WASH”.
Select “NO” to
“Do you change
an ink set?” from
“#ADJUST”->
“HEAD WASH”.
MS washing liquid set -> washing
Step3
Replacing
UIS coupling
Replacing 8-color
with 4-color
Replacing 8-color
with 4-color
Step4
Replacing
damper
Replace 7th and 8th dampers (white and silver were filled).
Do not replace other than those.
Step 5
Ink Filling
Select ES3 8-color for “Choose an ink type”.
SS21 4-color
-> Filling
SS21 6-color
-> Filling
SS21 6-
color+White
-> Filling
ES3 4-color
-> Filling
ES3 6-color
-> Filling
Step 6
Nozzle
Check
Nozzle check
If it is No Good, perform refilling until it becomes Good.
Step 7
Adjustment
Adjust
R.1.0
Maintenance Manual > Operating Principle > Ink System > Initial Filling
Model CJV30/TPC Issued 2008.08.04 Revised 2010.11.05 F/W ver. 2.50 Remark
1.0
