© 2009 MIMAKI ENGINEERING CO.,LTD.
1.3.3
P.2
1.3.3 Supply Cartridge Control and Selection
When there is more than one effective cartridge for 1-ink supply path
*1
with FUNCTION>MACHINE SETUP>CART. PRIORITY, the priority order of “2” and “3” is replaced.
The priority order of supply when using MBIS1 (FW Ver.2.00)
When using MBIS1 in all slots
Refer to the table above “When there is more than one effective cartridge for 1-ink supply path”.
When using MBIS1 and the ink cartridge as mixed loading through supply path of the same color
Use MBIS1 cartridge by priority.
If MBIS1 is expired, the ink cartridge is switched to use by prioriry.
Also, the cartridge using by priority can be switched temporarily with the operation below.
1. Press [ENTER] key on Local or Remote.
2. Press [REMOTE] key. Select or change with the JOG key.
Priority
Cartridge status
1
Expired cartridge
2
The cartridge having the smaller amount of remaining ink is selected.
3
If there is no distinction at “2”, the cartridge closer to the expiration date is selected.
4
If there is no distinction at “2” and “3”, the cartridge in the smaller slot number is selected.
*1
Priority
Cartridge status (Before V1.30)
1
The cartridge having the smaller amount of remaining ink is selected.
2
If there is no distinction at “1”, the cartridge closer to the expiration date is selected.
3
If there is no distinction at “1” and “2”, the cartridge in the smaller slot number is selected.
In the case of no mixed loading, the function above cannot be used.
The setting is restored by taking out the ink cartridge selected or turning off the power.
(Supplies from MBIS side.)
[REMOTE]
->
SS21INK
MMCCYYKK
REMAIN
99999999
BULK/CART SELECT
- B B B<
Supplying cartridge is displayed.
“-” Not mixed, “B” MBIS, “C” ink cartridge
R.1.2
Maintenance Manual > Operating Principle > Ink System > Supply Cartridge Control and Selection
Model CJV30/TPC Issued 2009.08.25 Revised
F/W ver. 2.00 Remark
1.2
