manualshive.com logo in svg

MIMAKI CJV30 Series, Maintenance Manual

The MIMAKI CJV30 Series is a high-quality printer cutter that requires regular maintenance to ensure optimal performance. Download the free Maintenance Manual from manualshive.com to learn how to properly care for your machine and keep it running smoothly. Don't wait, get your manual today!

Share
Download
background image

© 2009 MIMAKI ENGINEERING CO.,LTD.

6.2.5

P.1

1

2

3

4

5

6

7

8

R.1.0

 Maintenance Manual > Disassembly and Reassembly > Ink-related Parts > Pump Assy

Model CJV30/TPC Issued 2008.08.04 Revised

F/W ver. 1.00 Remark

1.0

Rev.

6.2.5 Pump Assy

Work procedures

1. Remove the 

station cover U

.

2. Remove the pump tube connected to the CP coupler. 

3. Remove the 

pump assy

 from the 

pump BKT

.

4. Reverse the disassembly procedure for reassembly.

Protrude the pump tube of the discharge side from tube end by 5 
to 9 mm.

Pump Assy

Pump Assy

Take care not to pollute the surroundings with waste 
ink or washing liquid.

Summary of Contents for CJV30 Series





























































































































































































































































































































Reviews:

No comments

Related manuals for CJV30 Series

Brands by name

Popular brands

Load more brands