MIMAKI CJV30 Series, Maintenance Manual

Page: 140 / 316

© 2009 MIMAKI ENGINEERING CO.,LTD. 5.1.9 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Test Items > Test Function > [MOTOR TEST] PUMP MOTOR
Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark
1.0
Rev.
5.1.9 [MOTOR TEST] PUMP MOTOR
 Function
Operation test of pump motor is executed.
 Operation Procedures
Step Item Description Remarks
1 Pump selection [

], [

]: Selects pump by moving the cursor.
[

], [

]: Selects operation.
[

], [

]:
Selection of item 1–3
2 Rotation direction
designation [

], [

]: Selects pump rotation direction.
Set value: FORWARD, REVERSE
3 Driving speed designation [

], [

]: Selects driving speed.
Set value: 100–4000pps (unit: 100pps)
4 Carriage/Motor state
selection [FUNCTION]:Carriage/motor state at test selection menu is
displayed.
<Carriage> IN: Executes at cap position.
OUT: Executes after carriage out.
<MOTOR> ON: Executes with Y-axis motor ON.
OFF: Executes with Y-axis motor OFF.
5 Test start [ENTER]: Removes the cap and moves the carriage to
maintenance position. Drives the pump motor with
designated conditions.
[END]: Ends the test.
During operation, open/
close the cartridge valve
with [FUNCTION].
6 End Test is completed.
Note that executing (FORWARD) while the cap is on causes vacuum suction.