background image

4

SERVICE - UNITED STATES

1-800-SAWDUST

 

(1.800.729.3878)

Monday-Friday, 7:00 AM - 6:30 PM CST

or visit 

www.milwaukeetool.com

Contact Corporate After Sales Service Technical 

Support  with  technical,  service/repair,  or  warranty 

questions. 
Email: [email protected]
Become  a  Heavy  Duty  Club  Member  at 

www.milwaukeetool.com  to  receive  important 

notifications regarding your tool purchases. 

SERVICE - CANADA

Milwaukee Tool (Canada) Ltd 

1.800.268.4015

Monday-Friday, 7:00 AM - 4:30 PM CST

or visit www.milwaukeetool.ca

LIMITED WARRANTY USA & CANADA

Every MILWAUKEE power tool* (see exceptions below) is warranted 

to the original purchaser only to be free from defects in material and 

workmanship.  Subject to certain exceptions, MILWAUKEE will repair 

or replace any part on an electric power tool which, after examination, 

is determined by MILWAUKEE to be defective in material or workman-

ship for a period of five (5) years** after the date of purchase unless 

otherwise noted.  Return of the power tool to a MILWAUKEE factory 

Service Center location or MILWAUKEE Authorized Service Station, 

freight prepaid and insured, is required.  A copy of the proof of purchase 

should be included with the return product.  This warranty does not 

apply to damage that MILWAUKEE determines to be from repairs 

made or attempted by anyone other than MILWAUKEE authorized 

personnel, misuse, alterations, abuse, normal wear and tear, lack of 

maintenance, or accidents.

Normal Wear:  Many power tools need periodic parts replacement and 

service to achieve best performance.  This warranty does not cover 

repair when normal use has exhausted the life of a part including, 

but not limited to, chucks, brushes, cords, saw shoes, blade clamps, 

o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and 

bumper cover washers.

*This warranty does not cover Air Nailers & Staplers; Airless Paint 

Sprayer; Cordless Battery Packs; Gasoline Driven Portable Power 

Generators; Hand Tools; Hoist – Electric, Lever & Hand Chain; M12™ 

Heated  Gear;  Reconditioned  Product;  and  Test  &  Measurement 

Products.  There are separate and distinct warranties available for 

these products.

**The warranty period for Job Site Radios, M12™ Power Port, M18™ 

Power Source, Jobsite Fan and Trade Titan™ Industrial Work Carts is 

one (1) year from the date of purchase.  The warranty period for the 

Drain Cleaning Cables is two (2) years from the date of purchase. The 

warranty period for the M18™ Compact Heat Gun and the 8 Gallon 

Dust Extractor is three (3) years from the date of purchase. The war

-

ranty period for the LED in the LED Work Light and the LED Upgrade 

Bulb for the Work Light is the lifetime of the product subject to the 

limitations above. If during normal use the LED or LED Bulb fails, the 

part will be replaced free of charge. 

Warranty Registration is not necessary to obtain the applicable war

-

ranty on a MILWAUKEE power tool product.  The manufacturing date 

of the product will be used to determine the warranty period if no proof 

of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT 

REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON

-

TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT.  

IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT 

PURCHASE THE PRODUCT.  IN NO EVENT SHALL MILWAUKEE 

BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL 

OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, 

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSE

-

QUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY 

PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR 

LOSS OF PROFITS.  SOME STATES DO NOT ALLOW THE EX

-

CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU.  THIS WARRANTY IS EXCLUSIVE AND IN LIEU 

OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL.  

TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS 

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH 

DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR

-

RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE 

EXPRESS WARRANTY AS DESCRIBED ABOVE.  SOME STATES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR

-

OPERATION

WARNING

To reduce the risk of injury, do not 

look  directly  into  the  light  when  the           

light is on.

Using the Light

1. Insert battery pack or plug into AC power.

2. Press the Power   button to turn on the light.

3. Press the Brightness 

 button to cycle through 

High

Medium

, and 

Low

. The light will default to 

the selected brightness the next time it is turned on. 

4. Press the MODE button to select area or flood 

lights. The light will default to the selected area 

the next time it is turned on.

5. Press the Power   button to turn the light off.

NOTE: 

On battery power, the light will flash to indi

-

cate the battery is reaching end-of-charge.

Orientation

The light can be oriented in multiple ways:

• Placing it on its base

• Hanging it upright by the handle

• Hanging it upside down by the rafter hook

MAINTENANCE

WARNING

To reduce the risk of injury, always 

unplug the tool and charger and re-

move the battery pack from the charger or tool be

-

fore performing any maintenance. Never disas-

semble the tool, battery pack or charger. Contact a 

MILWAUKEE service facility for ALL repairs.

Maintain Light

Keep your light, battery pack and charger in good 

repair by adopting a regular maintenance program. 

If the light does not work properly, return the light to 

a MILWAUKEE service facility for repairs.

WARNING

To reduce the risk of personal in-

jury and damage, never immerse 

your tool, battery pack or charger in liquid or 

allow a liquid to flow inside them.

Cleaning

Clean  dust  and  debris  from  vents.  Keep  handles 

clean, dry and free of oil or grease. Use only mild 

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and 

other insulated parts. Do not use sprays or solvents.

Some of these include gasoline, turpentine, lacquer 

thinner, paint thinner, chlorinated cleaning solvents, 

ammonia and household detergents containing am-

monia. Never use flammable or combustible solvents 

around tools.

ACCESSORIES

WARNING

Use only recommended accesso-

ries. Others may be hazardous.

For a complete listing of accessories, go online to 

www.milwaukeetool.com or contact a distributor.

Summary of Contents for M18 RADIUS COMPACT SITE LIGHT WITH FLOOD MODE













Reviews: