4
5
+
-
FUNCTIONAL DESCRIPTION
Direct Current
Symbology
No Load Revolutions per Minute (RPM)
Specifi cations
Cat. No.
0490-20
Volts DC
4
No Load RPM
Low 200
High 600
3.
Hold power tools by insulated grip-
ping surfaces when performing an
operation where the cutting tool may
contact hidden wiring or its own cord.
Contact with a “live” wire will make ex-
posed metal parts of the tool “live” and
shock the operator.
4.
Keep hands away from all cutting
edges and moving parts.
3
1
2
4
6
7
1. Bit holder collar
2. Clutch adjusting ring
3. Speed
selector
4. Lock
switch
5. Fuel
Gauge
6. Battery
7. Forward/reverse
switch
5
Underwriters Laboratories, Inc.,
United States and Canada
WARNING
ASSEMBLY
Always lock trigger or remove
battery before changing or removing
accessories. Only use accessories
specifi cally recommended for this
tool. Others may be hazardous.
WARNING
To reduce the risk of injury, wear
safety goggles or glasses with side
shields.
WARNING
Recharge only with the charger
specifi ed for the battery. For spe-
cifi c charging instructions, read the
operator’s manual supplied with
your charger and battery.
OPERATION
Installing Bits
Always remove the battery before inserting
or removing bits. Select the proper style and
size bit for the type of screw you are using.
1. To
install
the bit, pull out the collar.
Press the bit into the socket until the
collar snaps back and the bit is locked
into place.
2. To
remove
the bit, pull out the collar,
then pull out the bit.
NOTE:
It is
not
necessary to hold the collar
out when installing and removing bits.
Adjusting the Handle
The handle is designed for convenience and
control. The durable, center pivot allows the
handle to be used in the conventional shape
or folded into a pistol grip. Access to the
forward/reverse switch and lock switch is
comfortable in either handle position.
Inserting the Battery into the Tool
+
-
+
-
Fig. 2
1
Large slot
Large tab
Fig. 1
2
Arrow
Unlock
Lock
Line up the the large and small tabs on the
battery with the large and small slots in the
tool opening. Slide the battery all the way
into the tool. Turn the battery clockwise to
lock it in place. The arrow on the battery will
line up with the on the tool.
Removing the Battery from the Tool
Turn the battery cap counterclockwise to
unlock. The arrow on the battery will line
up with the on the tool. Pull the battery
out of the tool.
Checking the Fuel Gauge
To determine the amount of charge left
in the battery, press the forward/reverse
switch. The Fuel Gauge will light up for 2-3
seconds.
