Milltronics OCM II PL-269, Instruction Manual

Page: 5 / 107

USERS GUIDE TO MANUAL
Although the OCM II may appear complex due to the diversity of applications it may be programmed for, it is in
fact quite simple in the confines of a particular application.
By adhering to the following suggestions, it will be found that the OCM II is quick and easy to calibrate.
STEP ONE
Sections I through V should be read in order that the user may be familiarized with the OCM II.
STEP TWO
Refer to Table 3 listing the "P" parameters. Establish the values or codes to be entered for the parameters
required. Write (pencil) these onto the calibration flow chart, or a photocopy, for each device you have and circle
the corresponding units or mode.
STEP THREE
Refer to Table 4 listing the "U" parameters. As there are many different types of flow applications, it will greatly
simplify matters for the user to select the one that fits his requirements and to disregard all others. Establish the
values or codes to be entered for the parameters required. Write these onto the calibration flow chart and
circle the corresponding units or mode.
STEP FOUR
Now that all the data required to perform the calibration has been copied onto the calibration flow chart, follow
the flow chart and enter your parameter values in order as prompted by the OCM II.
Should you require assistance in determining your application type, contact Milltronics or your distributor.
■
PL-269 iii