Page 33 or 34
There are also ports for the laser, probe, and for a
coolant output available.
Use a zip tie anchor from the wire management kit
to pin the back right Y motor wire to the back of the
frame.
Run its wire to the back left and bundle the excess
(there will be a fair amount of excess) to the back left
of the frame along with excess from the back left Y
motor. Secure it with zip ties and a zip tie anchor.
Note the approximate position for the control box.
Also note where the USB cable and power cable plug
into the control box. Power is brought to the machine
simply by plugging and unplugging the power adapter
barrel at this location.
You may use the spiral wrap to tidy up wires
elsewhere on the machine.
