16
The position of the cutout on the isolator table must be defined according to the dimensions
and contents of the isolator in order to avoid any interference and improve ergonomics.
The following drawing shows the size of the pump upper part (the part that is on the top of the
isolator table), with its accessories, in relation to the cutout.
The following drawing shows the size of the pump bottom part (the part that is under the
isolator table), with the drain position recommendation, in relation to the cutout. The height of
the pump bottom part under the isolator table is 103 mm.
NOTE
The communication hub is not represented on this drawing. It can be attached in
multiple positions under the isolator table using the optional Steritest
™
Symbio
communication hub holder for isolators (See
Installing the Communication Hub under
Accessories and Replacement Parts
). It can also be fixed to one of the
isolator feet, using the optional communication hub holder for hoods (see
347
312
241
154
152
355
276
138
167
