Millipore milli-q, User Manual

Page: 80 / 90

- 80 -
Summary of Alarm messages,
Continued
Alarm
messages
(continued)
LCD message What it means
MILLI-Q RES > MAX The Milli-Q Water resistivity is out
of measurement range.
Contact Millipore.
MILLI-Q T < MIN The Milli-Q Water temperature is
out of measurement range.
Contact Millipore.
MILLI-Q T > MAX The Milli-Q Water temperature is
out of measurement range.
Contact Millipore.
POD LOCKED The POD Unit microswitch is
locked.
Push the Plunger all the way down
and release.
Q-GARD PACK OUT The Q-Gard Pack is not installed
correctly or it has been removed.
The System stops operating.
Verify that the Q-Gard Pack is
installed correctly.
Contact Millipore if the problem
continues.
QUANTUM CARTRIDGE OUT The Quantum Cartridge is not
installed correctly or it has been
removed. The System stops
operating.
Verify that the Quantum Cartridge
is installed correctly.
Contact Millipore if the problem
continues.
TANK EMPTY The System has detected an empty
Reservoir.
Refill the Reservoir.
Verify that the Reservoir level
sensor is plugged into the System
Cabinet.
WATER DETECTED A Water Sensor (an accessory
connected to the System) has
detected water. The System stops
operating.
Clean up the spilled water.
Make sure the source of the leak is
fixed.