Milli-Q Direct 16, User Manual, Page: 76 / 116

76 Milli-Q® Direct 8/16 System
Replacing the Progard® Cartridge and Vent Filter,
Continued
Removing Follow the steps below to remove the used Progard® Cartridge.
Step Action Diagram
1 Place the System into STANDBY
Mode.
2 Push the POD Plunger down
once to depressurise the System.
After water stops being
dispensed, push down the
POD Plunger again.
3 Open the System right door.
Remove the used Progard®
Cartridge.
4 In a few moments, the System
indicates that the Progard®
Cartridge is removed.
Continued on next page