Milli-Q Direct 16, User Manual, Page: 29 / 116

Milli-Q® Direct 8/16 System 29
Installing the Q-Pak® Pack
Procedure Follow the steps below to install a new Q-Pak® Pack.
Step Action Diagram
1 Start in STANDBY Mode.
2 •
Open the left door of the
System.
•
Remove the 2 protective caps
located on the ports inside.
3 •
Remove the covers on the
2 ports of the Q-Pak® Pack.
•
Make sure the rubber O-rings
are firmly in place.
•
Wet the O-rings with water.
4 Push the top of the Q-Pak® Pack
into the ports on the
System.
Continued on next page