Miller FieldPro Smart Feeder CE, Owner'S Manual

Page: 38 / 56

OM-264234 Page 32
Display Code
Description
Fault
H83 Output Current On Channel 3 Too Low Indicates current malfunctions in secondary circuit. If
this code appears, contact nearest Factory Authorized
Service Agent.
H84 Output Current On Channel 4 Too Low Indicates current malfunctions in secondary circuit. If
this code appears, contact nearest Factory Authorized
Service Agent.
H85 Output Current On Channel 1 Too High Indicates current malfunctions in secondary circuit. If
this code appears, contact nearest Factory Authorized
Service Agent.
H86 Output Current On Channel 2 Too High Indicates current malfunctions in secondary circuit. If
this code appears, contact nearest Factory Authorized
Service Agent.
H87 Output Current On Channel 3 Too High Indicates current malfunctions in secondary circuit. If
this code appears, contact nearest Factory Authorized
Service Agent.
H88 Output Current On Channel 4 Too High Indicates current malfunctions in secondary circuit. If
this code appears, contact nearest Factory Authorized
Service Agent.
H89 Voltage Detected When Output Is Disabled Indicates Voltage sense malfunction. If this code ap-
pears, contact nearest Factory Authorized Service
Agent.
H95 Motor Communication Indicates serial communication malfunction in PC2. If
this code appears, contact nearest Factory Authorized
Service Agent.
H96 WCC Communication Indicates serial communication malfunction in PC5. If
this code appears, contact nearest Factory Authorized
Service Agent.
H97 PC1 Communication Indicates serial communication malfunction in PC1. If
this code appears, contact nearest Factory Authorized
Service Agent.
H98 Lost Communication Indicates serial communication was initially made and
is now malfunctioning. Check wire feeder/power
source control cable connection and tighten if
necessary. May appear normally during firmware up-
dates. If this code continues to appear on the display,
contact nearest Factory Authorized Service Agent.
H99 No Communication Indicates serial communication is malfunctioning. If
error appears on power source and wire feeder, unit
might be linked for 460 VAC and 208-230 input power
is being applied. Check primary power and link unit
accordingly. Check wire feeder/power source control
cable connection and tighten if necessary. May ap-
pear normally during firmware updates. If this code
continues to appear on the display, contact nearest
Factory Authorized Service Agent.